LEENY-5000 semi-automatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 50-2000ml. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc.
1.Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
2.The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
3.The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
|General Information||LEENY -5000 FOR 5GALLON, one blower and one heater|
|Number of Cavities||7-22L 1 Cavity|
|Theoretical Output||7-22L 1 Cavity:90 BPH|
|Mould plate size||600x640mm|
|Voltage Standard||380v/3PH/50Hz or special order|
|Total Power(Full Loaded)||10-25KW|
|Min air compressor||1.6m3/min 3.0Mpa|
|Net dimension & Weight(LxWxH)|
|Blow Molding Machine||210x73x190cm|
|Neck Diameter Range||50-330mm|